Your timing mats should be cleaned and dried after each use. Make sure that the mats are dried prior to placing them in their bags. It is good practice to leave your bags open during storage, this allows any moisture that may be present in mats to evaporate.

After each use, do a physical inspection on the cables on each mat. If you find any damages please contact Trident RFID.

When rolling mats up for placement in bags, flip mat cable side up and starting at the non-cable end, Roll firmly, but not tight. Once rolled carefully lay the cable backwards/forwards along the width of the mat.

Do not stack other items on your mats during storage. Mats should be stored in a dry, cool environment.

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.