A Quick Look at your TM V1 Reader

FIGURE 1 –TimeMachine Club-XR Front Panel

1 – Battery Voltage Indicator	2 – Power Button
3 – Radio Antenna Connector	4 – Auxiliary 12V Output
5 – External Power Socket	6 – Receive Loop Sockets
7 – Transmit Loop Sockets	8 – External Trigger Socket
9 – External Buzzer Socket	10 – RS232 Data Port
11 – Reset Connector	12 – Relay Connector
13 – Clock Connector	14 – Inhibit Connector
15 – Inhibit Plug	16 – Router Indicators
17 – 3G Modem USB Socket	18 – Radio Indicators
19 – Micro SD Card	20 – Transmit Tune Button
21 – Micro USB Socket	22 – Data Mode Switch
23 – Data USB Socket	24 – Receiver Status Indicators
25 – Bluetooth Indicator	26 – Ethernet RJ45 Socket
27 – Status LCD Display	28 – Tag Read Activity Indicators

To avoid risk of damage or electric shock, ensure the reader and its charger are always protected from rain or splashes of water.
Fully charge the reader’s internal battery before the first use of the reader.
Fully charge the reader’s internal battery before events.
Fully charge the reader’s internal battery after use and prior to storing.
The reader’s internal battery should be fully charged every two months if the reader is not used for some time.