Permanent charging (SmartMonitor SITE L only)

For the SmartMonitor SITE L, permanent charging is required. The built-in battery is designed to support power disconnects and outages for a limited amount of time (see technical specification), but not for permanent monitoring.

If external power is not available or longer power outages occur, the SmartMonitor SITE L will give a power outage alarm.
For refrigerators with Solar Direct Drive (SDD), make sure you set an appropriate power alarm delay in SmartView.

Use the USB-C power charger / cable that comes with the SmartMonitor SITE L.

Screen	Information
	The lightning icon and the scrolling battery bars indicate that the device is connected to power and charging.
	The device is connected to power and fully charged.