Manual flight mode

Once the device is started, the device can be put in ‘manual flight mode’.

*During ‘manual flight mode’, RF emission exceeding what is allowed on aircraft, is suspended until the ‘manual flight mode’ is disabled. The device stores the manual flight mode state in non-volatile memory to ensure that the mode stays enabled even when the device unexpectedly resets. During active ‘manual flight mode’, any results from ‘automatic flight mode’ are ignored e.g., even if automatic flight mode determines that the device is not in flight, the radios remain suspended.

Activate the flight mode with the following steps (the process to deactivate the flight mode is the same):

No.	Screen	Description
1		Triple push the multifunctional button to get into the menu options.
2		“ACTIVATE FLIGHT MODE” will appear on the screen. Long press the multifunctional button to perform the activation/deactivation.
3		The FLY:MODE screen is loading up confirmation.
4		Static FLY:MODE screen indicates the Flight mode is on.
5		Confirmation that the restart of the SmartMonitor device has been initiated.
6		To initiate the restart on the SmartMonitor, triple-push the multifunctional button.