Air freight

The SmartMonitor device supports automatic flight mode, which ensures the automatic enabling of the flight mode upon take-off and automatic disabling of the flight mode upon landing of the aircraft. The flight mode ensures the suspension of all radio signals in flight.

If the landing could not be detected, the automatic flight mode will be disabled automatically after 24 hours.

The SmartMonitor device also has manual flight mode functionality. Follow the instructions to activate manual flight mode.

In order to use SmartMonitor devices for product monitoring in air freight (device on), the SmartMonitor device must be approved by the respective airline. Before using the SmartMonitor on a shipment, please check the airline approval list.

If the airline you would like to use, has not yet approved the SmartMonitor, please contact Berlinger at info@berlinger.com.

Airlines may require the SmartMonitor or batteries to be declared on the AWB (Airway Bill).

For example:

Disclaimer: Berlinger is not liable for approval to use the SmartMonitor on board of your selected carrier and the correct declaration of the SmartMonitor.

Find the battery specifications per SmartMonitor device type in the technical specification.

Contact your airline for support of the correct declaration.