Device info when device is running

Single-push the multifunctional button.

To scroll through available device info, single push the multifunctional button. Skip scroll text items with a button short press.

Nr.	Screen	Description
1a		Home Screen: The current temperature is displayed on the screen.
1b		With external sensor If an external sensor is successfully set up and connected, the Home Screen displays the current temperature of the external sensor. To check the temperature of the SmartMonitor device (internal sensor), go to SmartView.
2		The name of the configuration defined in SmartView is displayed.
3		The defined label name (e.g., Airway Bill, Refrigerator/Freezer ID, etc.) from SmartView is displayed on the screen.
4		The date for the SmartMonitor to be recalibrated can get displayed on the screen. After the scroll-through of “RECALB”, perform a short-press of the multifunctional button to display the date in format DD MMM YYYY. Note: This does not apply to SmartSensors (to be found on the calibration label attached to the SmartSensors).
5		With a long press of the multifunction button, the device can be stopped.

SmartMonitor SITE L only

Nr.	Screen	Description
1		Measured Maximum Temperature The measured maximum temperature within the last 24 hours.
2		Measured Minimum Temperature The measured maximum temperature within the last 24 hours.
3		Current Date/Time The current date/time is display in the following format: DDMMMYYYY HH:MM