Status View will show the status of the previous finished configuration processes (Lift Controller and/or Telealarm).
Once all the device configuration processes are ended, status screen will appear showing the GSR and the lift controller is communication status:
There are three icons in this view that may be seen showing each device and its status:
 |
Cloud Icon: Shows connection between GSR and Nayar network. Green: Connection confirmed and established. Grey: Waiting to get device status. Red: No connection between GSR and Nayar network. |
 |
Controller and link icon: Shows connection status between the GSR and the lift controller. Green: Connection confirmed and established. Grey: Waiting to get controller status. Red: No connection between GSR and lift controller. |
 |
Telealarm and link icon: Shows configuration status in the GSR to work as a telealarm gateway: Green: Configuration applied and TA ready to call. Grey: Waiting to get configuration status. Red: No configuration applied on the GSR. |
When the technician confirms that all the configuration is Ok (cloud and connection icons are green)will be allowed to select only of the following option:
 |
The configuration of this GSR is finished and the technician wants to block the device so no changes on the device will be further applied. |
Blocked GSR Status View
After selecting Finish and Block in any of the previous configuration processes, when the GSR ID is input in Add Device Screen, the technician will be redirected to the status view and will be able to see the status of the device and no further configuration changes are available.
The only action available for the technician is to replace the GSR device in case of GSR malfunction:
The user will be prompted to check OLD GSR ID (the one is going to be replaced) and to input the NEW GSR ID.
Every information and device previously configured in the OLD GSR will be cloned to the NEW GSR (lift controller and telealarm models, Equipment IDs, GSR phone number and all the configuration previously set). The NEW GSR will be completely configured and blocked, ready to be used as if this was the original GSR.
