Congratulations on your purchase of a LINKbridge. LINK represent the pinnacle of secure smart vessel monitoring, control and management.
Before you get started with your LINKbridge, we recommend you read this manual thoroughly. If you have any questions, please reach out to your LINK Distributor or contact LINK directly at support@linkconnected.com.
*All LINK systems come with a 1 year warranty as part of the LINK Core Subscription.
! READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THE PRODUCT. FAILURE TO DO SO MAY CAUSE PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY.
!DO NOT ATTEMPT TO INSTALL THE PRODUCT IF YOU DO NOT HAVE SUFFICIENT KNOWLEDGE OR EXPERIENCE RELATED TO INSTALLING ELECTRICAL SYSTEMS ON VESSELS. MAKE SURE TO TAKE ALL THE REQUIRED SAFETY PRECAUTIONS. SWITCH-OFF THE POWER SUPPLY OF THE VESSEL TO SAFELY CONNECT THE DEVICE. ENSURE APPROPRIATE FUSING IS INSTALLED.
!LINK solutions can only be serviced by LINK or their official trained representatives. Do not attempt to open or repair the product by yourself. Failure to do so will immediately void the warranty.
!Ensure power to the LINKbridge is isolated before making any changes to the vessel wiring.
!The manufacturer and distributors of this product cannot be held liable and declines responsibility for damage or personal injury resulting from improper use of the product or failure to observe the instructions of the Installation Procedure.
!Safe vessel operation is built around system redundancy – LINK recommends that all connected systems have some form of redundancy in the unlikely event of failure. The manufacturer and distributors of this product cannot be held liable and declines responsibility for any damage or personal injury resulting from failure of the solution.
LINK Imperium Limited TA LINK reserves the right to alter the characteristics and specification of the products and solutions at anytime
Post your comment on this topic.