COMPONENTS
A. All in One 10E
B. Antenna GSM (Optional)
C. Wireless USB Adapter (Optional)
D. USB Extender cable
E. 12VDC power adapter (Optional)
F. Die cut
CONNECTORS DIAGRAM
INSTALLATION
1. Use the die included in the box to mark the anchor points for the placement of the Advertisim.
2. Mark the 4 holes to drill and a bigger one to pass the cables through the space in the middle of the metal frame. Drill the marked holes. Connect the antenna (if supplied) to the antenna connector (9). Locate the antenna on the outside of the cabin (recommended roof), in order to improve signal reception.
3. Connect the Wireless USB adapter (if supplied) using the USB Extender cable into one of the inputs of the Advertisim (8). Connect the antenna and the power supply.
4. Make the connections to the controller.
5. Position the screen on the wall as shown in the picture.
6. Plug the adapter into a mains socket and connect it to the Advertisim (1).
7. Configure the devide using the Manager.
