COMPONENTS
A. 10.1” HB TFT panel
B. Main board
C. Video cable
D. CAN board
E. 12VDC power adapter
F. GSM antenna (optional)
G. Antenna pigtail (optional)
H. 4 Wire cable
I. 2 x Terminal block 3.81mm 3P
J. USB extender cable
K. USB WIFI adapter
L. Sticker
INSTALLATION
STEP 1: Connect the video cable to the 10.1” HB TFT panel.
STEP 2: Connect the video cable to the main board.
STEP 3: Connect the CAN board to the main board with the 4 wire cable.
STEP 4: Connect the terminal blocks to the CAN board, as shown in the picture. Follow the Controller generic connections.
STEP 5: Connect the USB WIFI adapter to the main board using the USB extensor.
Optional STEP: If the product was purchased with an antenna, connect the antenna to the main board with the pigtail cable.
STEP 6: Connect the 12VDC power adapter to the main board.
Full assembly:
