Edel K2 CAN and Binary

1. Binary.

Numbers and/or arrows are displayed unstable.
A filter is needed to suppress the binary converter pulses (EDEL-54279).
In case you want to adapt a binary display of a brand other than EDEL, an EDEL-54279 filter must be added.
In case you want to connect the arrows of the next departure, an additional module EDEL-54275/D/B and a board EDEL-54273 must be added.
When starting/stopping the lift, the advertisim shows a ‘-’ on the display.
It is an electrical problem, the drive induces momentary interferences causing an erroneous reading.

2. Material required.

USB-CAN option	Binary card option

3. Make the connection.