COMPONENTS
A. 15.6” TFT Panel
B. Main board
C. Binary board
D. 12VDC Power adapter
E. HDMI controller board
F. Video cable
G. Sticker
H. Terminal blocks 3.81mm 2P, 6P and 8P
I. GSM antenna (optional)
J. Antenna pigtail (optional)
K. HDMI cable
L. USB extender cable
M. USB WIFI adapter
N. 2 × 4 Wire cable
INSTALLATION
STEP 1: Connect the 15,6” TFT panel to the HDMI controller board with the video cable, as shown in the picture.
STEP 2: Connect one end of the HDMI cable to the main board and the other end to the HDMI controller board. Connect the HDMI controller board to the main board with a 4 wire cable.
STEP 3: Connect the binary board to the main board with a 4 wire cable.
STEP 4: Connect the terminal blocks to the binary board, as shown in the picture. Follow the Controller generic connections.
STEP 5: Connect the USB WIFI adapter to the main board using the USB extensor.
Optional STEP: If the product was purchased with an antenna, connect the antenna to the main board with the IPX cable.
STEP 6: Connect the 12VDC power adapter to the main board.
Full assembly:
