COMPONENTS
1. 17” TFT Panel
2. TCU
3. 12VDC Power Adapter
4. Controller Board
5. HDMI Cable
6. 3G Antenna
7. LVDS Cable
8. Terminal Bloks 3.81mm 2P, 6P and 8P
9. USB WIFI Adapter
10. Driver
11. Controller Driver Cable
12. Backlight Cable
INSTALLATION
STEP 1: Connect the Controller Board to the TFT 17” Panel with the LVDS Cable.
STEP 2: Connect the Driver to the TFT 17” Panel with the BackLight Cable.
STEP 3: Connect the Driver to the Controller Board with the Controller Driver Cable.
STEP 4: Connect the HDMI to the Controller Board and the TCU.
STEP 5: Connect the output current of the TCU to the Controller Board.
STEP 6: Connect the terminal blocks to the TCU.
Controller generic connections
STEP 7: Connect the USB WIFI Adapter to the TCU. Connect the 12VDC Power Adapter to the TCU.
Opcional STEP: If the product was purchased with an antenna, connect the Antenna to the TCU.
