COMPONENTS
A. 15.6” TFT panel
B. Main board
C. CAN board
D. 12VDC power adapter
E. HDMI controller board
F. Video cable
G. Sticker
H. 2 x Terminal block 3.81mm 3P
I. GSM antenna (optional)
J. Antenna pigtail (optional)
K. HDMI cable
L. USB extender cable
M. USB WIFI adapter
N. 2 × 4 Wire cable
INSTALLATION
STEP 1: Connect the 15,6” TFT panel to the HDMI controller board with the video cable, as shown in the picture.
STEP 2: Connect one end of the HDMI cable to the main board and the other end to the HDMI controller board. Connect the HDMI controller board to the main board with a 4 wire cable .
STEP 3: Connect the CAN board to the main board with a 4 wire cable.
STEP 4: Connect the terminal blocks to the CAN board, as shown in the picture. Follow the Controller generic connections.
STEP 5: Connect the USB WIFI adapter to the main board using the USB extensor.
Optional STEP: If the product was purchased with an antenna, connect the antenna to the computer board with the pigtail cable.
STEP 6: Connect the 12VDC power adapter to the main board.
Full assembly:
