1. THE DEVICE DOES NOT DISPLAY FLOOR LEVELS CORRECTLY
Verify that you have introduced all required information to configure the device on Advertisim Manager. To visualize correctly the elevator information you have to indicate the controller manufacturer and model (type of connection) on. For more information see Advertisim Manager Manual.
2. THE DEVICE RESTARTS CONSTANTLY
If your Advertisim device restarts automatically it is possible that the 3G/WiFi network signal is low. Change the location of the antenna to a higher level and distance it from any power sources (ex. elevator hose).
3. CONNECTING THE SPEAKERS TO THE NAYAR ELECTRONICS.
To connect the speakers to the NAYAR electronics, follow the steps outlined below:
3.1. Access the NAYAR electronics:
In the All In One and TCU models, it is necessary to disassemble the device in order to access the speaker connection point on the NAYAR electronics.
In contrast, in the ADV models, access is easier since the NAYAR electronics are visible and do not require prior disassembly of the device.
3.2. Connect the speakers to the NAYAR electronics
