COMPONENTS
a. All in One 15S
b. Antenna GSM (Optional)
c. Wireless USB Adapter (Optional)
d. USB Extender cable
e. 12VDC power adapter (Optional)
f. Die cut
CONNECTORS DIAGRAM
SURFACE INSTALLATION (Stainless frame)
1. Unscrew the screw nuts from the 6 studs.
2. Use the green cardboard die to mark the 6 holes to drill and a bigger hole to pass the cables through the space in the middle of the die.
3. Connect the antenna (if supplied) to the antenna connector (9). Connect the Wireless USB adapter (if supplied) into one of the inputs of the Advertisim (8). plug the adapter into a mains socket and connect it to the Advertisim (8).
4. Make the connections to the controller.
5. Position the screen on the wall as shown in the picture.
6. Plug the adapter into a mains socket and connect it to the Advertisim (1).
7. Configure the devide using the Manager.
