COMPONENTS
A. All in One 10E
B. Antenna GSM (Optional)
C. Wireless USB Adapter (Optional)
D. USB Extender cable
E. 12VDC power adapter (Optional)
CONNECTORS DIAGRAM
PLANS
INSTALLATION
1. Make the hole for the screen respecting the dimensions.
2. Position the screen on the wall as shown in the picture.
3. Locate the antenna on the outside of the cabin (recommended roof), in order to improve signal reception. Connect the antenna (if supplied) to the antenna connector (9). Connect the Wireless USB adapter (if supplied), using the USB Extender (1), into one of the inputs of the Advertisim (8). plug the adapter into a mains socket and connect it to the Advertisim (8).
4. Make the connections to the controller.
5. Depending on the model purchased, connect the integrated power cable (10) to the power supply system of the installation (use the DC/DC converter, if applicable) or plug the adapter into a mains socket and connect it to the Advertisim (8).
6. Configure the devide using the Manager.
