Opening Control Panel
Right click on the desktop and select ‘NVidia Control Panel’
Opening Topology
On the left hand side menu, select ‘System Topology’. This page gives a breakdown port by port for each GPU in the machine
Click the ‘EDID’ link next to any of the ports on either of the GPU’s
Exporting an EDID
Select the port with the EDID you wish to export into a file. Then click the ‘Export EDID’ button
Choose the destination and name of the EDID file. This will be done in a .txt format
Loading an EDID (Emulation)
On the Load tab, click Browse and find the EDID file you wish to load (must be in a .txt format)
With the file path selected, you can now select which ports you wish to emulate with this EDID
Remember to set the signal type to be what you wish to be outputting as
Unloading EDID’s
On the Unload tab, select the ports you wish to remove emulation from and then select ‘Unload EDID’. This may take up to a minute before the unit becomes fully responsive again
Post your comment on this topic.