Notch blocks are stored as files with the extension .dfxdll
Adding Blocks
To add blocks to Hippotizer, save them to the path:
C:\Users\Hippo\Documents\Green Hippo\Notch
Each block name must be preceded with a unique number, followed by an underscore. The number will determine the order blocks are chosen.
For example 01_V4PlusStock.dfxdll
will appear first in the list as V4PlusStock
In the image example above, only one of the two hippostockdfx
blocks will be visible in Hippo as they have the same index number.
Updating the Block select pin
When blocks are added or removed the Update button must be pressed once on a layer of that system to refresh the block list.
The blocks select pin is also updated on engine restart.
Post your comment on this topic.