Amba+ MK2

Software

Minimum Software Version

V4+ MK2 Systems must run Hippotizer Version 4.6.3 or greater.

Maximum Software Date

V4+ MK2 Systems can, subject to Software Assurance, install and run software released until November 1st, 2027.

Outputs

Zookeeper:

The Amba+ MK2 has several output connectors for use with Zookeeper. These use the motherboard on-board graphics system. Multiple displays may be used at once; however, these will consume CPU resources so it is advised to connect a single zookeeper display only when the system is in production use.

Output

The Amba+ MK2 has DVI-I and Display Port Outputs from the main graphics card. The Amba+ MK2 supports the use of a single display output at a time.

DVI-I:

Max Resolution: 2560 × 1600 @ 60Hz
Supports Splitters: Yes
Supports Conversion to Analogue (VGA): No

Display Port:

Max Resolution: 4096×2160 @ 60Hz
Supports Splitters: Yes
Supports Conversion to Analogue (VGA): No
Supports Display Port to DVI adaptor (passive): Yes
Supports Display Port to DVI adaptor (active): Yes

EDID Emulation:
N/A

Genlock:
N/A