Multi polyline

To draw a Multi Polylines:

• Click on the Multi Polyline button under Polyline.
• The command window will display ‘Polyline/Spline: Startpoint’. Select the start point of the polyline with the keyboard, mouse, tap, or by measuring with Flexijet.
• The command window displays: ‘Next point or Arc(a) / Close(cl) / Undo(u).’ You can choose different options: To set the next point or to draw an arc (a), to close the polyline (cl), or to undo the last action (u). In order to choose an option, simply enter the letter that is shown in brackets (), such as “a“ for arc.
• When you enter a new point, “Next point” is automatically chosen in the command window. A line element is drawn between the previous point and the current one:
• Continue to follow the prompts in the command window. You may click ‘Confirm’ or ‘Cancel’ to end or close the polyline by inputting ‘cl’ in the command window.
• The command window will display ‘Polyline/Spline: Startpoint’ again. So you can draw as many Pilylines as you need.
• If you are done Drawing polylines, click ‘Confirm’ or ‘Cancel’ twice. So, the function ends.