6.1.2.5.3. 6.1.2.9.3 Step 3: Control Behaviour

In setting up the Dynamic Image Control, the behaviour of the control must be specified

1. Behavior:

Current form behaviors ( See 7.2) are displayed in the “form” section.

*The behaviour for the control can be different depending on the stage at which the process is at).

Enable: If this option is selected, the control will be enabled on the web.
Disable: If this option is selected, the control on the web is disabled and cannot be changed by the user.
Invisible: If this option is selected, the controls will be invisible on users the web.

2. Relationship with Entity:

Clicking on this section and choosing the button will display the contact form associated with the selected control entity. More contact form …)See 7.1.2.9.2)

3.Location:

The position of the image display can be changed in this box.

4. Control name:

The name of the control can be edited in this box.

*If the control is generated by the designer of the form, it is automatically named.

*The name entered in this box is used in the coding environment (See 12.1), so the insertion of a valid name facilitates access to control in the coding environment.