The “QR Code” tab allows you to modify the configuration related to the generation of a QR code with the weight value, as well as the option to automatically send the weight as key-in to other applications..
The “Show QR Code on stability” option activates/deactivates the generation of a QR code with the value indicated by the display every time the weight on the scale changes. Clic the toggle switch to enable / disable.
The option “Send weight as keyboard input on stability” activates/deactivates the automatic sending of the value indicated by the display every time the weight on the scale changes. Clic the toggle switch to enable / disable.
The “Suffix” option offers two ways to add a suffix to the weight value being submitted, allowing you to automate the jump to the next form element where the weight is entered. For example, if we are using a spreadsheet, if you select the “New Line” suffix, after entering the weight the cursor will automatically jump to the next row of the sheet. Instead, if you select the “Tab” suffix, the cursor will move to the next column on the sheet.
The “Min stability time (ms)” option allows defining the minimum time for the system to consider that there is a new weight on the scale each time the weight on the display changes. This value must be expressed in ms (milliseconds).
The value “Min weight for recording” sets a minimum threshold to send a weighing. This value is expressed in number of intervals of the weighing scale. In the following example, the scale has an interval of 0.5kg, and the minimum weight for the automatic registration of a weighing is “10”. This implies that the registration of weighings will not be allowed for weight values less than 5kg.
Feedback
Post your comment on this topic.