To add a Dynamic DN Pool:
- Select DN Pool from the System menu
- On the menu, click Add to create a new DN Pool
- Select a Service Group
- Configure the DN Pool options as described in the table
- When finished, click Save
- To add another DN Pool, repeat the process
Field Name | Description |
---|---|
Service Group Name | Select the Service Group |
DN Profile Name | DN Pool Name |
DN Profile Description | DN Pool Description |
Route Partition | Select the Route Partition for the DN Range |
Search Across Clusters (Checkbox) | Enables DN management to search across multiple CUCM clusters when DNs are distributed across multiple clusters. |
Search All Partition (Checkbox) | Check this box to search all CUCM partitions when performing a DN lookup. |
Include Unassigned DNs (Checkbox) | Check this box to include unassigned CUCM DNs in the DN lookup. |
Enable DN Aging (Checkbox) | Check this box to enable DN aging on the DN Pool. Deleted DNs will be excluded from reassignment according the DN aging period configured on the Service Group. |
External Phone Number Mask | Enter a phone number mask to be applied when allocating a DN from this pool |
Enterprise Alternate Number Mask | Enter the Enterprise Alternate Number Mask to be applied when allocating a DN from this pool |
E.164 Alternate Number Mask | Enter the E.164 Alternate Number Mask to be applied when allocating a DN from this pool |
AAR Destination Mask | Enter a AAR destination mask to be applied when allocating a DN from this pool |
DN Prefix | Enter digits common to the range, such as are code and exchange |
Directory Number Pool Ranges From/To | Enter start and end of the DN Range. The range must be contiguous. The range cannot start with 0. |
Post your comment on this topic.