Akkadian Provisioning Manager Administration Guide

Network Configuration

  1. Open the virtual machine in the VMWare console.
  1. Login using:

Username – akkadianuser
Password – akkadianpassword

  1. From the Akkadian Appliance Manager main menu, select option 1 to Configure Network.
  1. Select option 0 to select the network interface.
  1. Select option 8 to launch the nmtui (Network Manager).
  1. Select “Edit a Connection”.

  1. Configure the network settings for your environment and select OK.

  1. Navigate back to the menu and select “Set system hostname”

  1. Configure the fully qualified hostname.

  1. Exit the nmtui and select “R” to restart the network.

  1. Optionally you may configure the server time by selecting option 2 from the configure network menu.
  1. It is recommended you change the default Akkadian Appliance Manager password by selecting option 4 (Web Server Configuration Menu) from the main menu and then selecting “p” (Change Current AAM Password”).
  1. From the main menu, select Reboot Server to finalize the configuration.
  1. When the system returns to the login prompt, the Akkadian Provisioning Manager virtual appliance deployment is complete and can be accessed by going to https://{Server IP or Name}/pme.

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Post Comment