Main SL-DOG Terms:
| Term | Abbreviation | Definition |
|---|---|---|
| Measurement ID | Meas. ID | Unique Identification number for assessments (for each device). |
| RX/TX Hardware ID | RX/TX Hw ID | Unique serial numbers assigned by InfoSense to the SL-RAT units; RX serial numbers are even. TX serial numbers are odd. When only one ID is noted, it will typically be the RX ID but refers to the pair. |
| RX Operator ID | RX Oper. ID | Operator ID entered by the operator into the SL-RAT receiving unit (RX) when conducting tests. |
| TX Operator ID | TX Oper. ID | Operator ID entered by the operator into the SL-RAT transmitter unit (RX) when conducting tests. |
| Date/Time | Date/Time | Date and time of the SL-RAT measurement – based on indicated SL-RAT time zone. |
| Measurement Duration | Meas. Dur. (sec) | Duration of the measurement as recorded by the SL-RAT receiver (RX). Measurement duration is in seconds. |
| Operator Pipe Length | Oper. Pipe Lng (unit) | Pipe length as entered by the SL-RAT receiver operator. This value is used in the pipe segment assessment. Pipe length is in feet. |
| Evaluated Pipe Length | Eval. Pipe Lng (unit) | Pipe length estimated by the SL-RAT using GPS |
| Measurement Status | Meas. Status | The SL-RAT receiving unit (RX) evaluates the conditions under which the pipe assessment is conducted and provides a warning concerning possible limitations in the measurement as follows:
|
| Pipe Status | Pipe Status | The Pipe Segment classification based on the Pipe Segment Assessment. It is also used to report the test type and condition. The Pipe Status can be one of the following eight possibilities:
|
| Field Assessment | Field Assess | Pipe assessment scaled from 0 to 10, calculated based on the pipe length indicated by the operator. |
| GPS Assessment | GPS Assess | Pipe assessment scaled from 0 to 10, calculated based on the pipe length calculated by SL-RAT units using GPS. |
| Notes | Notes | Notes associated with the measurement. Notes can be associated in the field by using the mobile app, or in the web portal by using the Add Notes/User Fields |
| User Field (1 to 5) | User Field (1 to 5) | Please note! This may not say “User Field” if you have customized user field settings! Additional fields associated with each measurement. User fields can be customized and renamed for consistent data entry (example usage include Segment ID, Basin ID, etc.) |
| Rx Latitude and Longitude | Rx Lat/Long | Global position system (GPS) latitude and longitude at the SL-RAT receiver (RX) unit at the time of the measurement; GPS RX measurement is in decimal degrees. |
| Tx Latitude and Longitude | Tx Lat/Long | Global position system (GPS) latitude and longitude at the SL-RAT transmitter (TX) unit at the time of the measurement; GPS TX measurement is in decimal degrees. |
Other terms:
| Term | Abbreviation | Definition |
|---|---|---|
| Comma Separated Values | CSV | File format compatible with CSV file programs such as Microsoft Excel |
| Keyhole Markup Language | KML | File format compatible with programs such as Google Earth |
| File format compatible with PDF file programs | ||
| Shapefiles | SHP | File format compatible with SHP file programs such as ArcGIS |
Last modified:
24 May 2023
Copyright © 2025 InfoSense
—
Powered by 