All settings can be stored onto SD Memory Card, including battery bay and electrical bay temperature set points, alarm settings, and system time, date, and temperature scale preferences.

To copy EPIC Series Battery Cabinet settings to SD Memory Card:
MENU > SAVE:RESET SETTINGS > “Backup to memory card”

The screen will briefly confirm the file was copied successfully. The configuration file is written to a file named CONFIGxx.EPC where xx is a sequential number that begins with 00 and increases by 1 for each file written ensuring that other configurations on the card will not be overwritten.

You may use this saved configuration file to:

  • Restore configuration in case someone inadvertently changes a setting and doesn’t remember the original setting.
  • Clone configuration to a similar console to eliminate need to set up parameters manually.
  • Configure a replacement Main Control Board automatically.

To copy EPIC Series Battery Cabinet settings from SD Memory Card to the Main Control Board:
MENU > SAVE:RESET SETTINGS >“Restore from memory card”

The screen will briefly confirm the file was copied successfully. The EPIC Series Battery Cabinet will restart with the restored configuration settings.

To restore EPIC Series Battery Cabinet settings to the factory default settings, Section 6.1.1:
MENU > SAVE:RESET SETTINGS >“Reset to Defaults”

The screen will briefly confirm that EPIC Series Battery Cabinet has been restored to the factory default settings.