Verifying Multi-Tap AC Input Voltage Setting - ATevo O&SI - 1PH Input Group I (6-25 Adc)

2.3.1. Determining if Multi-Tap Option is Present

2.3.3. Modifying Multi-Tap AC Input Voltage Setting

	Before you connect ac power to ATevo, inspect the present ac input voltage setting, and confirm the correct jumper positions for the desired ac input supply voltage. The multi-tap ac input voltage setting can be verified without removing the safety shield. Open ATevo’s front door and locate the Multi-Tap terminal block above the AC Input Breaker (CB1). Observe the relative locations of the RED jumpers in the Multi-Tap terminal block (TB-H#). Refer to the adjacent diagram to confirm the present ac input voltage setting is correct.

Before you connect ac power to ATevo, inspect the present ac input voltage setting, and confirm the correct jumper positions for the desired ac input supply voltage. The multi-tap ac input voltage setting can be verified without removing the safety shield.

Open ATevo’s front door and locate the Multi-Tap terminal block above the AC Input Breaker (CB1).
Observe the relative locations of the RED jumpers in the Multi-Tap terminal block (TB-H#).
Refer to the adjacent diagram to confirm the present ac input voltage setting is correct.

Last modified: 2 October 2023

2.3.1. Determining if Multi-Tap Option is Present

2.3.3. Modifying Multi-Tap AC Input Voltage Setting

Need more help with this?
Don’t hesitate to contact us here.

2.3.2. Verifying Multi-Tap AC Input Voltage Setting