5.1.1. Changing Display Mode

The DISPLAY MODE button selects the HOME Screen display choices:

• DC Voltage and Current (Vdc / Adc output)
• Date and Time (refer to Section 3.2.5)
• Ground Meter (refer to Section 3.2.5 and/or JA5124-09)
• Rectifier Temperature (refer to Section 3.2.5)
• AC Meter – optional (refer to JA5124-03)
• Battery Current Meter – optional (refer to JA5124-07)
  

To change Display Mode:
DISPLAY MODE > one of 6 displayed choices

*The DISPLAY MODE button is in the same relative location as the METER MODE button on legacy AT10.1 chargers. Its functionality is equivalent in that it determines which measurements are to be shown on the HOME screen.