Factory settings for each ATevo are summarized below.
– These values may be revised following a firmware update. For a printable worksheet, or to access the latest revision of these settings, see online resource (JA5124-02).
Click to expand the toggle to see the table.
- 24 Volt ATevo Set Points & Defaults
-
Parameter Low Range Set Point High Range Set Point Nominal (default) Units Float Voltage 22.00 29.50 26.00 Volts Equalize Voltage 23.40 32.00 * 28.00 Volts Current Limit 50% rating 110% rating 110% rating Amperes Equalize Time 0 (disabled) 255 24 hours High VDC Alarm 24.00 38.00 28.80 Volts Low VDC Alarm 14.00 29.50 24.00 Volts HVDC Shutdown 24.00 38.00 28.80 Volts High Level Detect 24.00 35.00 29.40 Volts Low Level Detect 15.00 24.00 20.40 Volts End of Discharge 15.00 24.00 21.00 Volts AC Ripple Alarm 50 500 500 milli-Volts Ground Fault POS[+] 1 50 10 kOhms Ground Fault NEG[-] 1 50 10 kOhms . * 32.00 Vdc High Range Set Point considered “extended equalize”.
Unit may not meet +/-0.25% regulation, beyond 31.00 Vdc. - 48 Volt ATevo Set Points & Defaults
-
Parameter Low Range Set Point High Range Set Point Nominal (default) Units Float Voltage 44.00 58.00 52.00 Volts Equalize Voltage 46.80 61.00 * 56.00 Volts Current Limit 50% rating 110% rating 110% rating Amperes Equalize Time 0 (disabled) 255 24 hours High VDC Alarm 48.00 76.00 57.60 Volts Low VDC Alarm 28.00 58.00 48.00 Volts HVDC Shutdown 48.00 76.00 57.60 Volts High Level Detect 48.00 72.00 58.80 Volts Low Level Detect 33.00 48.00 40.80 Volts End of Discharge 33.00 48.00 42.00 Volts AC Ripple Alarm 50 500 500 milli-Volts Ground Fault POS[+] 1 50 10 kOhms Ground Fault NEG[-] 1 50 10 kOhms . * 61.00 Vdc High Range Set Point considered “extended equalize”.
Unit may not meet +/-0.25% regulation, beyond 59.00 Vdc. - 130 Volt ATevo Set Points & Defaults
-
Parameter Low Range Set Point High Range Set Point Nominal (default) Units Float Voltage 110.0 140.0 131.0 Volts Equalize Voltage 117.0 149.0 * 139.0 Volts Current Limit 50% rating 110% rating 110% rating Amperes Equalize Time 0 (disabled) 255 24 hours High VDC Alarm 120.0 175.0 144.0 Volts Low VDC Alarm 70.00 141.0 120.0 Volts HVDC Shutdown 120.0 175.0 144.0 Volts High Level Detect 120.0 175.0 147.0 Volts Low Level Detect 87.00 120.0 102.0 Volts End of Discharge 87.00 120.0 105.0 Volts AC Ripple Alarm 50 500 500 milli-Volts Ground Fault POS[+] 1 50 10 kOhms Ground Fault NEG[-] 1 50 10 kOhms . * 149.0 Vdc High Range Set Point considered “extended equalize”.
Unit may not meet +/-0.25% regulation, beyond 145.0 Vdc. - 260 Volt ATevo Set Points & Defaults
-
Parameter Low Range Set Point High Range Set Point Nominal (default) Units Float Voltage 220.0 282.0 262.0 Volts Equalize Voltage 234 298.0 * 278.0 Volts Current Limit 50% rating 110% rating 110% rating Amperes Equalize Time 0 (disabled) 255 24 hours High VDC Alarm 240.0 350.0 288.0 Volts Low VDC Alarm 140.0 282.0 240.0 Volts HVDC Shutdown 240.0 350.0 288.0 Volts High Level Detect 240.0 350.0 294.0 Volts Low Level Detect 177.0 244.0 204.0 Volts End of Discharge 177.0 244.0 210.0 Volts AC Ripple Alarm 50 500 500 milli-Volts Ground Fault POS[+] 1 50 10 kOhms Ground Fault NEG[-] 1 50 10 kOhms . * 298.0 Vdc High Range Set Point considered “extended equalize”.
Unit may not meet +/-0.25% regulation, beyond 290.0 Vdc.
Need more help with this?
Don’t hesitate to contact us here.