This section details configuration of the ATevo system parameters, including date, time, and LCD controls (brightness, contrast, etc.).
To enter System Settings mode, select MENU > SYSTEM SETTINGS. ATevo will display a scrollable page of parameters.
To change a parameter, do the following:
- Navigate using UP and DOWN, and select it with EDIT/ENTER.
- Press LEFT and RIGHT to navigate to the digit to be modified
- Press UP and DOWN to change setting value.
- Once desired setting is displayed, press EDIT/ENTER to store it.
Clicking on each parameter below will reveal a screenshot of how the parameter is changed:
- Time
MENU > SYSTEM SETTINGS > ‘Time’
- Date
MENU > SYSTEM SETTINGS > ‘Date’
- Display Backlight ON/OFF
MENU > SYSTEM SETTINGS > ‘Backlight’
- Display Contrast
MENU > SYSTEM SETTINGS > ‘Contrast’
- Backlight Intensity
MENU > SYSTEM SETTINGS > ‘Backlight Intensity’
- Reverse Image Control
MENU > SYSTEM SETTINGS > ‘LCD color’
Last modified:
10 February 2021
Need more help with this?
Don’t hesitate to contact us here.