The setup wizard is displayed after the boot process.

The display language and the keyboard can be selected.

The domain of a Pintexx Workplace installation must then be specified.
e.g. workplace.<domain.com
Only https can be used.
The url is checked after entry.

Finally, the device must be registered.
To do this, a device name and a registration password must be entered.
The device name then appears in “Device”.
The registration password can also be configured in “Device”.

Once registration is complete, the configured url is loaded if an Intranet/Internet connection is available.
If no connection is possible, the device configuration is displayed.
A WLAN connection can then be set up there, for example