VS-44DT: Tunneling Commands to HDBT Output

Issue:

Is it possible to tunnel commands from the Ethernet port to the HDBT outputs?

Solution:

VS-44DT does not support tunneling commands from the Ethernet port to the HDBT outputs.
VS-44DT only supports the option to send RS-232 data from the RS-232 (DATA) port marked below to tunnel to HDBT port.

To send RS-232 data to an HDBT output:

1. Go to the VS-44DT webpage.
2. Select RS-232 data to be routed to a selected HDBT output.
   Commands are tunneled to the selected HDBT output.