VS-34FD: Control of 3rd Party Devices via DTAXRD2-OUT2-F34

Issue:

How can I enable control of 3rd party devices through a VS-34FD Output card?

Solution:

DTAXRD2-OUT2-F34 has a built-in network switch, see the diagrams in the examples below.
You can send different commands, based on the remote device IP address, to any HDBT port by the LAN port in the card.

Example 1:

DTAXRD2-OUT2-F34 supports control command over HDBT.
SL-280—> network switch—> LAN port of DTAXRD2-OUT2-F34—>BC-UNIKAT—>VP-427×1—> DISPLAY.

Example 2:

DTAXRD2-OUT2-F34 supports control command over HDBT:
Control System-1—> NET2—-> LAN port of DTAXRD2-OUT2-F34—>BC-UNIKAT—>TP-594Rxr—> Control System-3.
Control System-1—> NET2—-> LAN port of DTAXRD2-OUT2-F34—>BC-UNIKAT—>TP-594Rxr—> Control System-4.
Control System-1—> NET2—-> LAN port of DTAXRD2-OUT2-F34—>BC-UNIKAT—>Control System-2.

All the Control systems: Control System-1,Control System-2,Control System-3 and Control System-4 are connected.