Normally Sync Buses are local to each machine; in order to share them across the network the Sync Bus Link function in Sync Manager must be used.
Sink Bus Link connects machines together in a Master / Slave arrangement, where the Slaves listen to the Sink Buses of the Master.
Each master can send to multiple slaves.
To configure Sink Bus Link
- On the Master and the slave machines start the Sync Manager Component
- On the slave machine(s) enable the Sink Bus Link toggle in Sink Manager
- In the drop down, select the master machine
The sink buses on the slave machines will now use the HippoSync from the master machine.
Hinterlasse einen Kommentar.