Geometry

Each layer has independent Geometry control

The basic Geometry controls place media onto the layer:

The ‘X’ or right to left position of the media.

The ‘Y’ or up and down position of the media.

Switches the rotation control from Position to Speed. With Continuous disabled, rotation is similar to indexing a Gobo in a moving light.

The position (or Index) or speed of rotation of a clip. This control is affected by the Continuous switch above.

Zooms the content from 0 to 200% size on the layer.

Note: If additional zoom is required the mega zoom effect should be used.

The aspect changes the aspect ratio of the media.