Notch controls are exposed as pins for control by Hippotizer
By default, there are 10 float and 2 string pins for the loaded Notch effect.
Each float control is 16bit internally, but may be controlled as 8 or 16bit by DMX as required.
If more parameters are required, the number of channels can be changed by adding a text file to the Notch Block folder:
- Shut down the Engine and Zookeeper
- On the Hippotizer, navigate to Documents/Green Hippo/Notch
- Create a text document and name it Params.txt
- Open the text document and add three lines:
numtextparams=5
numfaderparams=20
numinputs=8
* Save the text file and close it
* Restart the engine
The three variables to consider when editing the number of parameters of Notch:
Text Parameters
- 2 by default
- No Limit to how many can be created
Fader Parameters (Floats)
- 10 by defalt
- No limit to how many can be created
Inputs
- 1 by default
- up to 8 supported
- Inputs use relays as a source.
Hinterlasse einen Kommentar.