Sync Bus Link

Normally Sync Buses are local to each machine; in order to share them across the network the Sync Bus Link function in Sync Manager must be used.

Sink Bus Link connects machines together in a Master / Slave arrangement, where the Slaves listen to the Sink Buses of the Master.

Each master can send to multiple slaves.

To configure Sink Bus Link

1. On the Master and the slave machines start the Sync Manager Component
2. On the slave machine(s) enable the Sink Bus Link toggle in Sink Manager
3. In the drop down, select the master machine

The sink buses on the slave machines will now use the HippoSync from the master machine.