| Register Name / Module Address | Assembled Address for PLC | Description |
|---|---|---|
| Set Induct Tracking Forward Direction Word 1 4:0139 |
M: 4:1612 E: O.Data [12] P: Byte 24 (Hi) Byte 25 (Lo) |
Only used when local module is accepting loads from Non-ConveyLinx controlled conveyor: Set value for 16-bit integer tracking word #1 for Carton leaving non-ConveyLinx controlled conveyor that is in transit to arrive on the local upstream zone when conveyor is running in default or “forward” direction |
| Set Induct Tracking Forward Direction Word 2 4:0140 |
M: 4:1613 E: O.Data [13] P: Byte 26 (Hi) Byte 27 (Lo) |
Only used when local module is accepting loads from Non-ConveyLinx controlled conveyor: Set value for 16-bit integer tracking word #2 for Carton leaving non-ConveyLinx controlled conveyor that is in transit to arrive on the local upstream zone when conveyor is running in default or “forward” direction |
| Set Induct Tracking Reverse Direction Word 1 4:0237 |
M: 4:1614 E: O.Data [14] P: Byte 28 (Hi) Byte 29 (Lo) |
Only used when local module is accepting loads from Non-ConveyLinx controlled conveyor: Set value for 16-bit integer tracking word #1 for Carton leaving non-ConveyLinx controlled conveyor that is in transit to arrive on the local upstream zone when conveyor is running in opposite of default or “reverse” direction |
| Set Induct Tracking Reverse Direction Word 2 4:0238 |
M: 4:1615 E: O.Data [15] P: Byte 30 (Hi) Byte 31 (Lo) |
Only used when local module is accepting loads from Non-ConveyLinx controlled conveyor: Set value for 16-bit integer tracking word #2 for Carton leaving non-ConveyLinx controlled conveyor that is in transit to arrive on the local upstream zone when conveyor is running in opposite of default or “reverse” direction |