Table name: /BTI/TE_RISKL
There are 3 fields in this table:
- RISKLEVELID: 10 character field for the Risk Level Identifier.
- RISKLEVEL: 10 digit numerical field used to indicate the risk level. The higher the value of this field, the higher the risk.
- TITLE: 50 character comment field. This can be used to indicate the risk level in words. For example, “Low risk”, “Moderate risk”, “High risk”, “Extremely High Risk”, etc.
Below are some example entries for this table:
| Risk Level Identifier | Risk Level | Comment |
| BT0001 | 1 | Risk level 1 |
| BT0002 | 2 | Risk level 2 |
| BT0003 | 3 | Risk level 3 |
| BT0004 | 4 | Risk level 4 |
| BT0005 | 5 | Risk level 5 |
| BT0006 | 6 | Risk level 6 |
| BT0007 | 7 | Risk level 7 |
| BT0008 | 8 | Risk level 8 |
| BT0009 | 9 | Risk level 9 |
| BT0010 | 10 | Risk level 10 |
When setting up Risk Analysis, you can specify a risk level value. If that is set, the Risk Analysis will only report on objects that have a risk level greater than the specified value.
Post your comment on this topic.