Several Ethernet configuration parameters are used by all protocols; other parameters are used only by specific protocols. This section specifies configuration of parameters used by all protocols.
To change the IP address:
MENU > COMMUNICATION > “Ethernet setup” (as shown in Section 4.2) > “IP addr:” > change digits
To change the “Netmask:” selection:
MENU > COMMUNICATION > “Ethernet setup” (as shown in Section 4.2) > “Netmask:” > change digits
To change the “Gateway Address”:
MENU > COMMUNICATION > “Ethernet setup” (as shown in Section 4.2) > “Gateway:” > change digits
Last modified:
24 October 2023