Custom analysis types can be created by customers to complement the standard-out-of-the-box ShiftLeft analyzers. In order to do this, entries must be maintained in the following tables:

Table Usage
/BTI/TE_ANLTYPE Lists all the analysis types currently available within ActiveControl
/BTI/TE_ANLTYPEP Contains all the analysis type parameters. These are only required for the types that need them
/BTI/TE_ANTYPEPT Analysis parameter types:
01 BOOL TRUE or FALSE
02 COMBO Combination
03 COMBOLIST Combination list
04 DATE Date value
05 STRING String value
06 MEMO Multi-line
07 NUMERIC Numeric value
/BTI/TE_ANREASON Lists all the analysis error reason codes
/BTI/TE_ANREAS_P Configuration used to control the approval / import anyway functionality. This is stored by Reason, Analysis type, Target and Location.
• If the Analysis type is blank the config applies to all analysis types
• If the Target is blank or 9999 the config applies to all targets
• If the Location type is blank the config applies to all locations
/BTI/TE_ANRELINK Used to link the error reason codes to the relevant analysis types

To implement an analysis type one of the standard ShiftLeft analysis function modules should be copied to a Z version so the framework and parameters can be copied and utilised. The recommendation is to copy function module /BTI/TE_ANALYSIS_CHECKDATE as this FM utilises analysis parameters and custom field processing both of which are likely to be required in most custom analysis types.

It is recommended to number any custom analysis types and reason codes starting with a ‘9’ to distinguish them from standard ones and to prevent them from being overwritten during upgrades. E.g. 9001

Once the table entries and function module are available, they will appear for use within the ActiveControl configuration alongside the standard ShiftLeft analysers.

Feedback

Was this helpful?

Yes No
You indicated this topic was not helpful to you ...
Could you please leave a comment telling us why? Thank you!
Thanks for your feedback.

Post your comment on this topic.

Post Comment