Configuring Serial Communications Adapters
ATevo can support up to three (3) optional Serial Adapter modules.
Each Serial Adapter module can:
- support SCADA protocols (DNP3 or Modbus)
- be used as a standard communications interface to connect to external serial devices
- be used in various applications (such as Forced Load Sharing)
Instructions on how to configure Serial Communications Adapters are found in the JA0102-54.
Configuring Ethernet Communications Adapter
ATevo can support an optional Ethernet Adapter (A22) module.
The Ethernet Adapter module:
- can support SCADA protocols (DNP3 or Modbus)
- will support an ATevo web page interface (future)
- will permit a file transfer mechanism to upload/download files for firmware upgrade and log file transfer (future)
Instructions on how to configure the Ethernet Adapter are found in the JA0102-54.
Last modified:
18 April 2022