The EZ-Qube module utilizes 2 output signals: SPEED and ERROR.

SPEED Signal

For all EZ-Qube modules except EZ-QUBE-P-MR (Article Number 1510-6020), the SPEED output produces an ON/OFF signal whose frequency is proportional to the speed of the motor. For the EZ-QUBE-P-MR (Article Number 1510-6020) module, the SPEED output is a non-oscillating digital signal that is energized when the motor is running and de-energized when the motor is stopped.

How to Wire the SPEED signal for a PNP type EZ-Qube
How to Wire the SPEED signal for a NPN type EZ-Qube

Pulse Speed Output

ERROR Signal

The ERROR signal is a digital output that is used in conjunction with the LED Status Indicators to display specific conditions of the module. In general, when any one of several error conditions is active, the ERROR signal will be ON. If no error condition exists, then the ERROR signal will be OFF

How to Wire the ERROR signal for a PNP type EZ-Qube
How to Wire the ERROR signal for a NPN type EZ-Qube

Error Output and LED Status