Input Power Supply Requirements 24.0VDC +15% / – 25%
NEC Class II Certified
Standby Current Consumption < 30 mA without Motor
Built-in Current Limits Max. Peak Current 16 A
Max. Starting Current ECO Mode 3A
Max. Rated Current ECO Mode 2.5A
Max. Starting Current BOOST Mode 5A for 1.5 seconds
Max. Rated Current BOOST Mode 3.5A
Motor PWM Frequency 33.3 kHz +/- 0.1%
Initialization Time <= 20 msec from power on
Motor Start Response <= 5 msec
Storage temperature -40ºC to 85º C ( -40ºF to 185ºF)
Ambient Operating temperature -10ºC to 40ºC ( 15°F to 104°F)
Humidity 5% to 95% non-condensing
Enclosure IP Rating IP20 – Indoor Use Only
Altitude up to 2000m
Environmental Pollution Class 2
Weight Approximately 70g