The module utilizes 2 output signals: SPEED and ERROR.
SPEED Signal
For all modules except EZ-QUBE-P-MR (Article Number 1510-6020), the SPEED output produces an ON/OFF signal whose frequency is proportional to the speed of the motor. For the EZ-QUBE-P-MR (Article Number 1510-6020) module, the SPEED output is a non-oscillating digital signal that is energized when the motor is running and de-energized when the motor is stopped.
How to Wire the SPEED signal for a PNP type
How to Wire the SPEED signal for a NPN type
ERROR Signal
The ERROR signal is a digital output that is used in conjunction with the LED Status Indicators to display specific conditions of the module. In general, when any one of several error conditions is active, the ERROR signal will be ON. If no error condition exists, then the ERROR signal will be OFF
How to Wire the ERROR signal for a PNP type
How to Wire the ERROR signal for a NPN type