The combination of signals on the Run A and Run B terminals allows you to dynamically set the speed with your digital run signals to the EZ-Qube Module module. The following chart lists the signal states and their respective speed control:
| Run A | Run B | Description |
|---|---|---|
| ON | OFF | Start motor and run at 100% of the speed selected on DIP Switches or “0-10V” input |
| ON | ON | Start motor and run at 75% of the speed selected on DIP Switches or “0-10V” input |
| OFF | ON | Start motor and run at 50% of the speed selected on DIP Switches or “0-10V” input |
| OFF | OFF | Stop motor |