From the HOME screen, press EDIT/ENTER six (6) times, until the Edit Current Limit Level Screen is visible, ‘Current Limit A)’, on top of display. To set this parameter follow the steps in Section 4.2.1.

After setting the Current Limit level to the desired value and pressing EDIT/ENTER to save the set point, configuration of Basic ATevo Set Points and Alarms is complete and the display returns to the HOME screen.

Last modified: 19 July 2023

¿Necesitas más ayuda?
No dudes en ponerte en contacto con nosotros aquí.

Gracias por darnos tu opinión.