ATevo monitors charger voltage on the inside of the DC Output Circuit Breaker (CB2). The construction of this component features a small amount of internal resistance. In certain (24Vdc & 48Vdc) models, breaker types, or depending on required sensitivities, this may affect remote sense voltage calculations.

To enable Remote Sense Compensation, press MENU, then select ADVANCED SETTINGS.

  • Navigate to Remote Sense Enable using UP and DOWN.
  • Select it with EDIT/ENTER.
  • Press UP and DOWN to change setting to on.
  • Once desired setting is displayed, press EDIT/ENTER to store it.
Last modified: 1 August 2023

¿Necesitas más ayuda?
No dudes en ponerte en contacto con nosotros aquí.

Gracias por darnos tu opinión.