4.10. Configuring Ground Alarms

The ATevo firmware provides two (2) types of ground alarms.

• ground fault alarm – triggered by current leakage to ground
• ground imbalance alarm – triggered by pos(+) / neg(-) difference
  

Likewise, each ground alarm type features two (2) levels of notification priority (alarm ‘warning’ & alarm ‘critical’).

• Setting Up Ground Fault Alarm Sensitivity
• Setting Up Ground Imbalance Alarm

For a Field Service Instruction on locating and identifying site ground faults, refer to:

• Ground Fault Detection In The Real World (JD5032-00)

For further information regarding ATevo ground features, refer to:

• Everything You Wanted To Know About Grounding (JA5124-09)